Orbea R10 User Manual

TURN RING
Place the helmet on your head. Turn the ring clockwise
until the headband is rm yet comfortable.If you need
to loosen the headband, TAKE HELMET OFF, turn the
ring counterclockwise. All t adjustments must be made
with the helmet in the proper position. Failure to do this
will result in a poor t. A poor t will allow the helmet
to move out of position or come off in an accident.For
a proper turn ring operation, refer to Figure 1. For a
proper position, please refer to Figure 8.
Fig.1

Orbea R10 Specifications

General

Brand	Orbea
Model	R10
Category	Motorcycle Accessories
Language	English