DUAL RATCHET
Place the helmet on your head. Push the Dual Ratchet
adjustors until the headband is rm yet comfortable.
If you need to loosen the headband depress the
levers on the adjustors and pull the sliders apart. All
t adjusments must be made with the helmet in the
proper position. Failure to do this will result in a poor t.
A poor t will allow the helmet to move out of position
or come off in an accident. For proper Dual Ratchet
operation, refer to Figure2. For proper position, please
refer to Figure 8.
Fig.2
To Next Page
Loading...