Orbegozo PC 3050 - Page 9

PC 3050
9
6. Overload indication
7. Auto power off：60S
8. Battery：2xAAA 1.5V
NOTICE
1. Turn on the scale ,the LCD will show “88888”, then turn to “0,00g”. It means the scale is ok to weight.
If the LCD shows “88888”,then turns to UnSt, It means the scale is unstable and need to place in flat
and stable platform.
2. If not in use, the scale would automatically turn off in 60s.
3. If overload, the LCD display will show “O_ Ld”.
4. If low battery, the LCD display will show “Lo”and turn off automatically，means battery should be
changed.
5. When the reading is stable, the sign of “hold” will be on the top left of the LCD.
OPERATION
1. Remove the battery cover at the back of the scale, put 4 AAA 1.5V battery inside and put back the
battery cover. Place the scale on a level platform.
2. Press “ON/OFF” to turn on the scale. When stable, the LCD display will show “0.0g”.