There is tip over switch on the base. When the heater
tips over, the electricity will be turned off
automatically.
LEGS ASSEMBLY
Place the wheels in the brackets and snap them into place.
Place the supports with the wheels at the ends of the lower
part of the appliance and screw them on.
INSTRUCTIONS FOR USE AND OPERATION OF THE REMOTE CONTROL
Connect the appliance to the power outlet.
Put the switch in position I
Press the On/Off button
Press the Heat Setting button to set the desired power:
- Position 1: Minimum power, 1000W
- Position 2: Maximum power 2000W
Set the temperature. Press the Temp Setting button to increase the temperature by
1°C each time:
- Position 1 (1000W): You can select from 18 to 24ºC
- Position 2 (2000W): You can select from 25 to 30ºC
Set timer. Each time you press the Timer button, the timer will increase by 0.5 hours
up to a maximum of 12 hours.
To Next Page
Loading...
