Orbic Joy 2 - Date and Time

77
Gestures
You can hide the navigation buttons at the bottom of the screen
for an unobstructed screen experience. Instead, swipe to navigate
your device.
1. Tap System > Gestures.
2. Tap Quickly open camera to open the camera by pressing
the Power button twice. This works from any screen .
3. Tap System navigation to choose any of the options :
• Gesture navigation
• 3-button navigation
4. Tap Press & hold power button to access :
• Power menu
• Digital assistant
• Tap Press & hold duration to adjust the sensitivity of
the power button.
5. Tap
Prevent ringing to silence the ringer of an incoming
call.
Date & time
Date and time information is automatically captured by your
device when connected to the wireless network by default.
You may want to manually change the date and time information
outside the network coverage using the date and time settings.
1. Tap System > Date & time.
2. Tap
Set time automatically. The Date and Time are set
automatically and grayed out. If this option is disabled, you
must set the Date and Time manually.
3. Tap
Set time zone automatically under Time zone to set
the time zone.