English
- 48 -
ORUS RF Programmable Thermostat User Manual
ADVANCED PROGRAMMING
• In advanced programming it is possible to access the following operation
parameters:
-
regulation type
-
parameters for regulation type
-
antifreeze temperature
-
temperature measurement unit
-
Setting/Test of the remote activator
-
keypad lock password
-
system operation hours
-
battery charge status
Regulation type (only for winter operation)
• Field (22) will display the writing “rEG=”
and on field (16) letter “O” (ON-OFF
programming) or “P” (proportional
programming) will flash.
• To enter advanced programming, press
the “PRG” key for more than 3 seconds.
The parameter to be modified will flash;
using
“ ”
and
“ ”
it is possible to
modify its value. Use
“ ”
to confirm
• Using the
“ ”
and
“ ”
keys,
choose
the desired regulation mode and press
“ ”
to confirm and move to the setting
of the next parameter.
the setting and move on to the next parameter. Once the last parameter has been
confirmed, you will exit the menu and the programmable thermostat will restore
operation with the previously set operation.
To Next Page
Loading...
