M
Misty MartinJul 25, 2025
Why does my Orbit B-hyve say Fault and flash a zone number?
- KKimberly FerrellJul 25, 2025
The Orbit Timer might display 'Fault' along with a zone number due to a short in the wire or a short in the solenoid.
To Next PageTo Next PageWhy does my Orbit B-hyve say Fault and flash a zone number?
The Orbit Timer might display 'Fault' along with a zone number due to a short in the wire or a short in the solenoid.
Power| rated input voltage (Australia) | 240V AC |
|---|---|
| rated input voltage (Europe) | 230V AC |
| rated input voltage (USA) | 120V AC |
| rated input current | 0.15A |
| max load (AUS & EU) | 24V AC 1 Amp |
| max load (USA) | 24V AC 750 mA |
Operating Environment| operating temperature range | 32-167° F (0-75° C) |
|---|---|
| storage temperature range | 32-176° F (0-80° C) |
| operating humidity range | 0–80% |
| storage humidity range | 0–90% |
| altitude | 6, 500' (2, 000 meters) |
