EasyManua.ls Logo

Orbit SS 255 - Page 13

Orbit SS 255
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
03 Height 100----200
04 Weight 20-----150
05 FAT 19 Under weight
FAT = (20---25) Normal weight
FAT = (25---29) Over weight
FAT 30 Obesity
1.12 Heart Rate Control (HRC)
There have 3 HRC programs
Press“PROG”and choose HRC to enter heart rate control system.
SPEEDdisplay HRC;
TIMEdisplay the defaulted item 30:00;
DISTANCEdisplay the distance0.0
CALORIES: display the calories (0.0)
PULSEdisplay the target heart rate;
Press “MODE”, and enter the target heart rate
SPEED: display HRC;
TIMEdisplay the defaulted item 30:00 and shining;
DISTANCEdisplay the distance (0.0);
CALORIES: display the calories (0.0)
PULSEdisplay the target heart rate and shining;
Press “SPEED (+ -)”or “INCLINE(+ -)”to adjust the target heart rate,
Then press “MODE” again to enter exercise program.
SPEED: display HRC;
TIMEdisplay the defaulted item 30:00;
DISTANCEdisplay the distance (0.0);
CALORIES: display the calories (0.0)
PULSEdisplay the target heart rate
Press “SPEED (+-) ” or “INCLINE (+-)” to adjust the target heart rate.
Press “START” and the treadmill will start at the lowest speed after 5 seconds.
The system will adjust the speed or incline according to the detected heart rate to
Control the user’s heart rate is in the range of target heart rate every 15 seconds (The range of heart rate is
+-10BPM of Target heart rate. if the target heart rate is 100, then the range is 90-110)
If ( the user's heart rate - the target rate ) >+-15BPM, then the system will adjust the speed
by decrease/Increase 0.5km every 15seconds
If (the user's heart rate- the target rate )< +-15BPM, then the system will adjust the incline

Related product manuals