Orbitalum GF 6 - User Manual

GF 4, GF 6, RA 8, RA 12
(AVM/MVM)
de Rohrtrenn- und Anfasmaschinen
Originalbetriebsanleitung und Ersatzteilliste
en Pipe cutting and beveling machines
Translation of original operating instructions and spare parts list
fr Machines à tronçonner et à chanfreiner
Traduction du mode d'emploi original
et liste de pièces de rechange
it Tagliatubi e smussatrici
Traduzione del manuale d'istruzioni originale
e elenco dei ricambi
es Biseladora y cortadora de tubos
Traducción del manual de instrucciones original
y lista de piezas de repuesto
nl Afkort en afschuinmachine
Vertaling van de originele gebruiksaanwijzing
en reserveonderdelenlijst
ru 


cn
管道切割和坡口机
原操作指导书和备件清单翻译
cz 

sk 

790 142 765

Summary

2. Information and Safety Instructions for the Responsible Body

2.1 Requirements for the Responsible Body

2.2 Using the Machine

Instructions on proper and improper use of the machine.

2.4 Basic Safety Instructions

Fundamental safety rules for operating the pipe cutting and beveling machine.

4. Features and Scope of Application

4.1 Features

4.3 Scope of Application

4.3.1 Working Range

5. Technical Specifications

5.1 Pipe Cutting and Beveling Machines

Detailed technical specifications for GF, RA models with AVM/MVM.

6. Initial Operation

6.1 Checking the Parts of Delivery

7. Storage and Transport

7.1 Storage

7.2 Transport

Safety precautions and procedures for transporting the pipe cutter.

7.2.1 Transporting the Pipe Cutter

Step-by-step instructions for safely moving the machine.

8. Set-up and Assembly

8.1 Mounting the Pipe Cutter on the Workbench

Instructions for securely attaching the pipe cutter to a workbench.

8.2 Mounting the Line Laser

8.4 GF 4: Fitting the Clamping Jaws

8.5 Fitting the Saw Blade, Bevel Cutter, Additional Cutters

Instructions for mounting cutting and beveling tools.

8.6 Adjusting the Pipe Dimension

Procedure for setting the correct pipe dimension for cutting.

8.7 Selecting the Motor Speed

9. Operation

9.1 Processing the Pipe with AVM

Detailed steps for pipe processing using the Automatic Feed Module (AVM).

9.2 Processing the Pipe with MVM

Detailed steps for pipe processing using the Manual Feed Module (MVM).

9.3 Processing the Pipe Manually

Instructions for manual pipe processing without feed modules.

10. Servicing, Maintenance, Troubleshooting

10.1 Maintenance

Procedures and schedule for routine machine maintenance.

10.2 Checking the Oil Level of the Gear and Topping Up

10.3 Cleaning the Slide Guide

10.4 What to Do If? - General Trouble-shooting

Guide to identifying and resolving common machine problems.

10.4.1 What to Do in the Event of Tool Breakage

Specific steps to take if a cutting tool breaks during operation.

10.5 Error Messages;Trouble-shooting AVM

Troubleshooting guide for AVM error messages and faults.

Orbitalum GF 6 Specifications