Orca 500 - TROUBLESHOOTING GUIDE

46
4.0 QUESTIONS FRÉQUENTES
Attention! In any case, always comply with the safety instructions set out in point I.I. at the
beginning of this manual in order to avoid potential mechanical or physical damage..
Observation
Possible reason
Solution
All LEDs flash quickly,
with alarm beep
Overload of the power
supply box
Switch off and contact the after-sales
service
All LEDs flash quickly,
with alarm beep
Overload of the power
supply box
Switch off and contact the after-sales
service
The 2 WALL+2H LEDs
flash quickly with alarm
beep
Overload of the drive
motor 1
Check for foreign objects trapped in the
belts. Otherwise, contact the after-sales
service.
The 2 FLOOR+3H LEDs
flash quickly with alarm
beep
Overload of the drive
motor 2
Check for foreign objects trapped in the
belts. Otherwise, contact the after-sales
service.
The
WALL+FLOOR+2H+3H+3
H LEDs flash quickly with
alarm beep
The cleaner is out of
the water and cannot
restart automatically
Put the cleaner back in the water and
restart.