To Next PageTo Next PageWhat to do if my Oreck BB1200 will not run?
If your Oreck Vacuum Cleaner won't run, make sure it's firmly plugged into the wall outlet. Also, check the electrical source, such as the fuse or circuit breaker. If it doesn't help, take it to a service center or call for the nearest one.
How to keep Tools/Wands together on Oreck BB1200?
To ensure that the tools/wands stay together on your Oreck Vacuum Cleaner, push and turn them to secure.
General| Model | BB1200 Series |
|---|---|
| Height Adjustment | Automatic |
| Type | Upright |
| Filtration | HEPA |
| Cord Length | 30 ft |
| Cleaning Path Width | 12 in |
| Bag Type | Disposable Bag |
| Filter Type | HEPA |
Essential safety guidelines for operating the vacuum cleaner to prevent fire, shock, or injury.
Key precautions for safe operation, including filter bag use, liquid pickup, and motor overload protection.
Details the three-year limited warranty for parts and ten years for housing, including exclusions and limitations.
Lists included parts with numbers and describes available accessories for purchase.
Step-by-step instructions for assembling the vacuum, including attaching the strap and tools.
Guidance on powering on the vacuum, installing the hose, and using features like the extension wand.
Covers filter bag replacement, micro filter changes, and HEPA filter/scent cartridge installation.
Identifies common problems like the cleaner not running or low suction, with possible causes and solutions.
