Problems Possible Source Areas to Check
Cleaner Will Not Run
1. Not plugged in properly 1. Be sure cleaner is firmly
plugged into wall outlet.
2. No electricity in wall outlet. 2. Check electrical
source–fuse or
circuit breaker.
3. Motor protector tripped. 3. See “Motor Protection
System” page 1.
4. Needs service. 4. Take to service center
or call for nearest
service center.
Vacuum Will Not
1. Filter bag is full. 1. Replace filter bag. See
Pick Up Or Has
“Changing the Filter Bag,”
Low Suction
page 5.
2. Hose/wand tool is clogged. 2. Remove obstructions.
3. Air leak due to missing or 3. Replace gasket.
damaged gasket. See page 6.
Tools/Wands Will Not
1. Proper friction fit not 1. Push and turn.
Stay Together
being obtained.
ENGLISH
Troubleshooting Guide
ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER.
7
To order call:
US: 1-800-989-3535
CANADA: 1-888-676-7325
Replacement Treated
Filter Bags (12 pk. with
1 Micro Filter)
No. PKBB12DW
Replacement
Micr
o Filter
No. 72005-01
Replacement White
Bag Gasket
No. 72017-02
V
inyl Tool Rack
No. CADDYBB
Oreck Fresh Air® Tabs No. AIRTABS
ACCESSORIES SOLD
SEPARATELY
To Next Page
Loading...
Need help?
General
