Oreck DISCOVER UK30500

To Next Page

WARNING - WHEN USING AN ELECTRICAL PRODUCT, BASIC PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED TO AVOID ELECTRIC SHOCK, FIRE, AND/OR SERIOUS INJURY, INCLUDING

THE FOLLOWING:

• Fully assemble product prior to use.

• Operate vacuum only at voltage speciﬁed on

data plate on bottom of cleaner.

• Do not leave vacuum when plugged in. Unplug

from outlet when not in use and before

cleaning or servicing.

• Do not use outdoors or on wet surfaces.

• Do not allow to be used as a toy. Not intended

for use by children age 12 and under. Close

supervision is necessary when used by or

near children. To avoid injury or damage, keep

children away from product, and do not allow

children to place ﬁngers or other objects into

any openings.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments

and products.

• Do not use with damaged power cord or

plug. If vacuum is not working as it should,

has been dropped, damaged, left outdoors,

or dropped into water, have the product

inspected by an Authorized Oreck® Service

Center prior to continuing use. Call

• 1-800-989-3535 for the nearest service center

or visit our website at www.oreck.com.

• Do not pull or carry by power cord, use cord

as handle, close a door on cord, or pull cord

around sharp edges or corners. Do not run

vacuum over cord. Keep cord away from

heated surfaces.

• Do not unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

• Do not handle plug or vacuum with wet hands.

• Do not put any objects into openings. Do not

use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce

air ﬂow.

• Keep hair, loose clothing, ﬁngers, and all

parts of body away from openings and moving

parts. Brushroll continues to operate when in

the upright position.

• Turn o all controls before unplugging.

• Use extra care when cleaning on stairs. Do not

place vacuum on stairs or furniture, as it may

result in injury or damage.

• Do not use to pick up ﬂammable or

combustible liquids, such as gasoline, or ﬁne

wood sandings or use in areas where they

may be present.

• Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or hot

ashes.

• Do not use without inner ﬁltration bag in

place.

CAUTION - TO REDUCE THE RISK OF

DAMAGE

• Avoid picking up hard, sharp objects with this

product, as they may cause damage.

• Store appropriately indoors in a dry place. Do

not expose machine to freezing temperatures.

• With brushroll on, do not allow product to sit

in one location for an extended period of time,

as damage to ﬂoor can result.

• Brush roll continues to turn while product is

turned on and handle is in upright position.

To avoid damage to carpet, rugs, and ﬂooring,

avoid tipping cleaner or setting it on furniture,

fringed area rugs, or carpeted stairs during

tool use.

WARNING - TO REDUCE THE RISK OF

ELECTRIC SHOCK

• This appliance has a polarized plug (one blade

is wider than the other). This plug will ﬁt in a

polarized outlet only one way. If the plug does

not ﬁt fully in the outlet, reverse the plug. If it

still does not ﬁt, contact a qualiﬁed electrician

to install the proper outlet. Do not alter the plug

in any way.

DISCOVER

™

UPRIGHT VACUUM

USER’S MANUAL

MODEL: UK30500

IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY

BEFORE ASSEMBLY AND USE.

This product is intended for Household use only. If

used Commercially warranty is VOID.

For assistance, please call Customer Service:

1-800-989-3535 Canada 1-800-989-3535,

Mon-Fri 9am-6pm EST.

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

READ ALL SAFETY WARNINGS AND INSTRUCTIONS BEFORE USING THIS PRODUCT.

ASSEMBLY

Your new Oreck Discover Vacuum will come with

2 pieces, the body and the handle.

Ensure the lower tube connector is tightened

clockwise.

Attach vacuum handle to the upper tube with

the power button facing away from the user.

Insert the handle into the upper tube until you

hear the “click” and the pushpin is fully through

the hole on the upper tube.

OPERATION

Fully assemble or install product prior to

use.

OPERATING THE ORECK

DISCOVER

™

Make sure the disposable inner bag is in place.

Do not operate the vacuum without a disposable

inner bag. Plug the power cord into an electrical

outlet and press the ON/OFF switch on the back

of the vacuum when ready to operate. Press the

button once to turn the unit on high, press a

second time for low speed, and a third time to

turn the unit o.

Up-Position Lock - Place foot on power head

and lean handle back gently to release lock for

vacuum use. Return handle to the full upright

position to engage lock.

NOTE: Do not operate the vacuum while in the

upright and locked position. With brushroll on,

do not allow cleaner to sit in one location for

an extended period of time, as damage to ﬂoor

can result.

Easy Power Cord Storage - Turn cord release

to the up position, wrap power cord around cord

release and lower cord bracket located below

the carry handle.

Carry Handle - The carry handle is located on

back of the vacuum for easy lifting and carrying.

INNER BAG REMOVAL

WARNING: - To reduce the risk of

personal injury - Unplug before cleaning or

servicing.

Main Page

Need help?

Do you have a question about the Oreck DISCOVER UK30500 and is the answer not in the manual?

Summary

Assembly

Connect Vacuum Handle

Attach vacuum handle to the upper tube with the power button facing away from the user.

Tighten Lower Tube Connector

Ensure the lower tube connector is tightened clockwise for proper assembly.

Insert Handle into Upper Tube

Insert handle into upper tube until 'click' and pushpin is fully through.

Operation

Prepare for Operation

Ensure disposable inner bag is in place before operating the vacuum.

Powering On and Speed Settings

Press ON/OFF switch; press once for high, second for low, third to turn off.

Using the Up-Position Lock

Place foot on power head and lean handle back to release lock for use.

Power Cord Storage

Turn cord release up, wrap cord around release and lower bracket.

Carrying the Vacuum

Use the carry handle located on the back for easy lifting and carrying.

Inner Bag Installation

Remove Old Bag

Unzip outer bag, release bag dock, and pull collar outward to remove the old bag.

Install New Bag

Slide new bag collar onto dock, then push dock door until it snaps securely.

HEPA Odor Fighting Inner Bag

Bag Function and Importance

Disposable inner bag traps dirt and allows air passage for vacuum efficiency.

Using Oreck Bags

Use Oreck HEPA or non-HEPA bags for optimal cleaning ability and to prevent damage.

Stuffing or Blockage

Identify and Clear Blockages

Check intake opening, fan housing, and tubes for debris and clear using tools.

Reassemble Tube Assembly

Insert tube, push down until seated, and tighten collar clockwise to lock.

Maintenance

General Care and Cleaning

Wipe vacuum with damp cloth, clean deflector assembly, and outer bag.

Brush Roll Maintenance

Check monthly for lint, string, or hair; clean grooves; wipe vacuum exterior.

Motor Protection Shutdown

Cleaner stops if overheating; headlights flash. Unplug, check bag, clear obstruction.

Lubrication

Motor and brushroll bearings are lifetime lubricated; do not add lubricant.

Troubleshooting

Vacuum Will Not Run

Check power cord connection, wall outlet, and clear any blockages.

Vacuum Does Not Pick Up

Check for thermal shutdown, full bag, clogs, worn brush, or clogged pores.

Vacuum Still Does Not Operate Properly

Review all previous checks; contact service if issues persist.

Warranty

Residential Use Warranty

Covers defects in material/workmanship for original purchaser for residential use.

Exclusions from Warranty

Does not cover consumable parts, accident, abuse, commercial use, or alterations.