Need help?Do you have a question about the Oreck FC1000 and is the answer not in the manual?
General| Model | FC1000 |
|---|---|
| Filtration | HEPA |
| Power | 1200 watts |
| Cleaning Path Width | 12 inches |
| Power Source | Corded Electric |
| Dust Capacity | 1.5 quarts |
| Filter Type | HEPA |
| Type | Upright |
| Cord Length | 30 feet |
| Special Features | Lightweight |
Steps to assemble the canister, hose, handle, and nozzle.
Explains the function and indicator of the Dirt Sensor.
Details on adjusting the power nozzle handle for different positions.
Instructions for selecting carpet or hard floor settings.
Information on the brushroll and its activation switches.
Guide to adjusting carpet height and understanding the indicator.
Overview of various cleaning tools and their storage.
Instructions on how to attach cleaning tools to the handle or wand.
Procedure for cleaning stairs with the vacuum cleaner.
Steps for opening the vacuum, removing, and installing a new filter bag.
Guide to removing and cleaning the motor filter.
Instructions for removing and replacing the HEPA Media Filter.
Procedure for checking and replacing the power nozzle belt.
Guide to replacing the brushroll after belt replacement.
Instructions for reinstalling the brushroll cover.
Steps to replace the nozzle hood after maintenance.
Criteria for determining when the brushroll needs replacement.
Step-by-step guide for replacing the brushroll.
Instructions for replacing the headlight bulb in the power nozzle.
Troubleshooting steps for blockages in the hose and wand.
Procedures to check for and clear blockages in the power nozzle.
Troubleshooting steps when the vacuum fails to power on.
Steps to diagnose and resolve issues with low or no suction.
Solutions for when the power nozzle fails to operate.
General troubleshooting for overall improper vacuum operation.
To Next Page