SETUP MODE
In the Setup Mode, you can set the user’s weight, time, date,
alarm On/Off and alarm time, and beep tone On/Off.
1. Press SET to enter Setup Mode.
2. Wait for the screen to appear.
3. Press and hold SET to set values in each setting option (or
press SET once to skip to the next setting option). Press
MEM to increase values or to decrease values. The
setting options (in sequence) are:
•
Weight - weight unit, weight value
•
Time - 12/24 format, hour and minute
•
Date - year, month-day/day-month format, month and
day
•
Alarm - alarm On/Off (press MEM to toggle), hour and
minute
• Beep - beep tone On/Off (press MEM to toggle)
4. Press
SET to confirm.
IMPORTANT
• Set the time and your user data after every battery
replacement.
• Re-set the user data when used by a different user.
REMARK Press anytime to return to Main Mode.
To Next Page
Loading...
