MANUALLY SET CLOCK
To set the clock manually, disable the clock signal
reception first.
1. Press and hold CLOCK.
2. Press
/ to change the settings.
3. Press CLOCK to confirm.
The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (month – day / day
– month), month, day and language.
BAR339DP: Time zone offset sets the clock +/- 23
hours from the received clock signal time.
NOTE If you enter + 1 in the time offset setting, this will
give you your local time plus one hour. If you are in the
US (BAR339DPA only) set the clock to:
0 for Pacific time +1 for Mountain time
+2 for Central time +3 for Eastern time
NOTE The language options are English (E), Spanish (S),
Italian (I), French (F), German (D), and Russian (R).
To select clock display mode:
Press CLOCK to toggle between clock with seconds,
clock with weekday.
ALARM
To set the alarm:
1. Press and hold ALARM.
2. Press
/ to change the settings.
3. Press ALARM to confirm.
indicates alarm is on.
To activate / deactivate alarm:
1. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm on / off.
To silence the alarm:
• Press SNOOZE to silence it for 8 minutes
OR
• Press any key to turn the alarm off and activate it
again after 24 hours.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius with a
75% accuracy.
Main unit Projector
Sunny
Partially Cloudy
Cloudy
Rainy
Snowy
To Next Page
Loading...
