To Next PageTo Next Page
Need help?Do you have a question about the Oregon Scientific BAR338PA and is the answer not in the manual?
General| Type | Weather Station |
|---|---|
| Model | BAR338PA |
| Display | LCD |
| Indoor Temperature | Yes |
| Outdoor Temperature | Yes |
| Radio controlled clock | Yes |
| Temperature Measurement Range | Outdoor: -20°C to +60°C |
| Temperature Display Units | °C / °F |
| Power Source | Battery |
| Wireless Transmission Range | 30 meters |
| Wireless range | 30 m |
Enables snooze alarm and activates backlight for five seconds.
Sequences through temperature display selections of current, maximum and minimum.
Changes between indoor and outdoor temperature display.
Alternates time/day display and enables clock setting mode.
Displays alarm set time or activates alarm function.
Increases or decreases the value of a setting.
Selects between Centigrade (°C) and Fahrenheit (°F).
Resets main display unit settings to factory defaults.
Sequences through the 4 US time-zones.
Controls for image rotation and focus adjustment.
Graphically displays general weather forecast for the next 12-24 hours.
Appears when the alarm is active.
Indicates outdoor or indoor temperature.
Appears when the alarm time is displayed.
Identifies signal strength received from US Atomic Clock.
Indicates when batteries are low and need replacement.
Indicates month-day (MD) calendar display.
Flashes when the remote unit transmits a reading.
Resets remote sensor settings to factory defaults.
