5
GB
Projector Features
Feature Effect Instructions
Adjustable Rotates 180° to cast Adjust by pivoting forwards
Projector image onto any wall or backwards the projector,
so that the projection lens
is pointed in the appropriate
direction
FOCUS Focuses image Rotate knob forwards or
Knob (A11) backwards until the image
clarity is optimized
[
] Rotates image on a Turns an image to maintain
IMAGE given surface to an upright position
ROTATION maintain an upright
knob (A10) position
180° Horizontally flips Flips an image to maintain
ROTATION an image on a given an upright position
button (A12) surface to maintain
an upright position
HOW TO USE THE PROJECTOR
POWER ADAPTER
Your BAR338PA comes with an AC power adapter. For continuous
projection the AC power adapter must be used. To install the
adapter:
1. Unscrew the cover at the bottom of the stand.
2. Plug the adapter into the adapter socket.
3. Connect the power adapter to a wall socket.
4. Slide [PROJECTION ON] to ON.
To turn off the projector, slide the [PROJECTION ON] back. Note
that this switch can only be used with the power adapter connected.
For momentarily projection, use [SNOOZE/LIGHT].
HOW TO USE THE BACKLIGHT
Press the [SNOOZE/LIGHT] button once. The backlight will light
up on the LCD Display and around the key panel for five seconds.
Projection will also be on for five seconds.
DISPLAY MODES
In normal display mode, the current time, including seconds, will
be displayed. To display weekday, press [CLOCK] once. To switch
back to normal time display, press [CLOCK] once.
To Next Page
Loading...
