Oregon Scientific EW96 - BRIEF INTRODUCTION; OVERVIEW OF THE RECEIVER UNIT

BRIEF INTRODUCTION
Thank you for your purchase of this Radio Controlled
Projection Alarm. Please read these instructions
carefully and keep the manual well for future
reference.
The receiver unit has a clear display that shows the
indoor temperature, time and date.
OVERVIEW
RECEIVER
1.Projector:
• Use it to project the time.
2.SNOOZE/LIGHT key:
• In normal time mode, press it once to turn on
the backlight for 5 seconds.
• Press it to silence the current alarm when it is
going and enter the snooze mode for 8 minutes.
3.LCD display:
• Display time, indoor temperature and date.
4.+ key:
• In time setting mode, press it to increase the
setting values.
5.SET CLOCK key:
• In normal time mode, press it once to enter
the normal time mode.
2
EN
3
1
2
4
5
6
7
9
10
8
11
12
13
14
16
18
15
17