EasyManua.ls Logo

Oregon Scientific Imola FST-301 - Set Radio Signal Format; To Disable or Enable Auto-Synchronization

Oregon Scientific Imola FST-301
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
EN
Rugby (England). When the unit is within 1500
km (932 miles) of a RF signal, the reception
icon will blink during reception.
SET RADIO SIGNAL FORMAT
The RADIO SIGNAL FORMAT switch is located
in the battery compartment. Select EU (DCF)
or UK (MSF), Then, press RESET to reset the
unit.
Reception takes 2 – 10 minutes to complete.
Once complete, the icon will stop blinking.
NOTE
For best results, place the unit away from
metal or electrical objects, and near a window
with a clear view to the sky.
TO DISABLE OR ENABLE AUTO-
SYNCHRONIZATION
Press DOWN for 2 seconds to disable the
auto-synchronization. The unit will not respond
Strong signal Weak signal No signal

Related product manuals