Oregon Scientific RGR122 User Manual

1
GB
REMOTE RAIN GAUGE
MODEL: RGR122
USER’S MANUAL
INTRODUCTION
Congratulations on your purchasing the RGR122 Remote Rain
Guage. The rain guage is equipped with the following functions:
- Daily and total rainfall display
- Nine-day rainfall history
- Rainfall alarm
- Indoor temperature display
- Maximum and minimum temperatures
- Real-time calendar clock
- Daily alarm
- 300-feet transmission range
The RGR122 operates at 433MHz. No wire installation is required.
MAIN FEATURES: MAIN UNIT

Oregon Scientific RGR122 Specifications

General

Type	Wireless Rain Gauge
Rainfall Resolution	0.2 mm
Power Source	2 x AA batteries
Measurement Range	0 to 9999 mm
Resolution	0.2 mm
Weight	300 g
Compatibility	Oregon Scientific weather stations
Transmission Range	Up to 100 meters
Display	No display

Summary

Introduction to the Remote Rain Gauge

Main Unit Features and Components

Four-Line Display

Displays total rainfall, current rainfall, history, indoor temp, and calendar clock.

Rain Reset/Since Button

Displays start day for total rainfall; clears total/current rainfall and resets date stamp.

Rain Search Button

Enforces a search for the rain gauge sensor.

Mode Button

Navigates between clock, calendar, and daily alarm modes.

Temp/Memory Button

Cycles through indoor temp records; clears temp memory.

Rain History Button

Displays rainfall history for specific days.

Rain Alarm Button

Sets and activates the rainfall alarm.

Antenna (Main Unit)

Receives radio signals from the rain collector.

Temperature Unit Switch

Selects temperature units between Celsius and Fahrenheit.

Rainfall Unit Switch

Selects rainfall measurement units between inches and millimeters.

Rain Alarm On/Off Switch

Toggles the rainfall alarm function on or off.

Reset Button

Returns all settings to their default factory values.

Clock Alarm On/Off Switch

Toggles the daily alarm function on or off.

Battery Compartment (Main Unit)

Houses batteries for the main unit.

Removable Table Stand

Provides a stable base for the main unit on a flat surface.

Rain Collector Features

Antenna (Rain Collector)

Transmits radio signals to the main unit.

Leveling Indicator (Cross)

Used to check the leveling of the rain collector.

Battery Compartment (Rain Collector)

Houses batteries for the remote rain collector.

Installation Guide

Operating the Remote Rain Gauge

Total Rainfall Display

Shows total rainfall; allows unit selection and viewing of record start date.

Rainfall History

Displays recorded rainfall for up to nine days.

Rainfall Alarm Setup

Configures and activates the rainfall alarm with adjustable thresholds.

Disconnected Signals

Troubleshooting steps for loss of signal between units.

Indoor Temperature

Displays current, min, and max indoor temperatures.

Calendar Clock Setup

Setting and operating the clock, calendar, and daily alarm.

Precautions and Reset Function

Reset Button Usage

Resets the unit to default settings in case of malfunction.

General Precautions

Guidelines for safe handling, cleaning, and maintenance of the device.

Specifications and Compliance

Product Specifications

Detailed technical data for the main unit and rain collector.

FCC Compliance Notice

Information regarding regulatory compliance and potential interference.

Customer Support and Warranty

Customer Assistance Contact

Information for obtaining help with the product.

Product Warranty Details

Terms and conditions of the product warranty.