Oregon Scientific RM323A - Rear Panel Control Buttons; [KEY-LOCK] Slide Switch; [RESET] Button; Battery Installation

2
4. FOLDABLE TABLE STAND
BEFORE YOU BEGIN
Before operation, remember to slide the key-lock switch to
the left to release all key operations.
BATTERY INSTALLATION
1. Remove the battery compartment door.
2. Insert two (2) pieces of “AAA” 1.5V batteries as shown.
3. Press [RESET].
4. Replace the battery compartment door.
4. [ALARM] BUTTON
- Press to toggle among the calendar, weekday alarm
and single alarm modes
- Press and hold for 2 seconds to enter the setting modes
of the corresponding alarm in display
5. [ALARM ON/OFF] BUTTON
- Press to activate/deactivate the corresponding alarm
in display
CONTROL BUTTONS: REAR PANEL
1. [KEY-LOCK] SLIDE SWITCH
- Slide to lock the key-functions
2. [RESET] BUTTON (inside battery compartment)
- Press to return all settings to default values
3. ROTARY KNOB [UP] AND [DOWN] BUTTONS
- Scroll up or down to increase/ decrease the value of a setting
RM323A_M_Eng.p65 2004.10.21, 6:47 PM2