To Next PageTo Next PageWhat to do if my Oregon Scientific Clock is not syncing?
If your Oregon Scientific Clock isn't syncing, try the following: * First, adjust the batteries. * Then, press the RESET button. * Manually activate auto-synch. If these steps don't work, you might be too far from a signal. Alternatively, you can disable auto-synching.
General| Display | LCD |
|---|---|
| Time Format | 12/24 Hour |
| Alarm Function | Yes |
| Snooze Function | Yes |
| Temperature Display | Yes |
| Battery Type | AAA |
| Display Features | Backlight |
| Type | Digital |
| Power Source | Battery |
Instructions for installing, replacing, and notes on battery types for the device.
Explains how the clock receives radio signals for automatic time synchronization.
Step-by-step guide to manually set the date, time, and other clock parameters.
Procedure for setting the alarm time and activating/deactivating it.
How to view current, minimum, and maximum indoor temperature readings.
Instructions for projecting the time, adjusting image orientation, and focus.
