Oregon Scientific TP391 - Roger Beep

12
EN
To change the VOX level:
1. Press
4 times until the number starts ashing.
2. Press and hold
or to change the VOX level.
3. Press
to conrm and exit the menu. Or, press to
conrm and go to the next Menu Option.
LCD SYMBOL DESCRIPTION
0 VOX disabled
3 Low sensitivity – only audibly loud voices are
transmitted (useful for noisy environments)
2 Normal sensitivity – ideal setting for voice-activated
transmission
1 High sensitivity – detects and transmits all sounds
(including background noise)
Once the VOX level is activated you can set a delay time, which keeps the
unit transmitting for 1 to 5 seconds after you have nished speaking (level
1 = 1 second and level 5 = 5 seconds).
To set the delay time:
1. Press
5 times until the number starts ashing.
2. Follow steps 2-3 above.
ROGER BEEP
With Roger Beep, the receiving party hears a beep tone when a message
has been transmitted. This avoids situations where messages are interrupted
during transmission.
To disable / enable Roger Beep:
Press and hold , then press to turn ON the unit.
P/N:086L004722-016 REV.1 PAGE: 14/152