EasyManua.ls Logo

Oregon Scientific WA633 - To Empty The Water Tank; Using The Aroma Diffuser; Low Water Level Indication; Care And Maintenance

Oregon Scientific WA633
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Place the covers back to the main unit.
7. Plug the power adapter to the power outlet.
Make sure the adaptor is not obstructed and is
easily accessible to the unit.
NOTE
Do not use distilled water.
Do not use water over the room temperature.
Use natural essential oils only.
Switch off and unplug the unit from the mains
before moving or cleaning the unit.
Do not overll the water tank. Always keep the unit
body dry.
TO EMPTY THE WATER TANK
1. Turn off the unit, then unplug the adapter from the
power outlet.
2. Remove the covers from the unit.
3. Pour the water out from the tank.
4. Put the covers back on the unit when nished.
NOTE
Do not pour water through the diffuser outlet.
If water spills onto the unit body, the power cable
or the power plug, wipe with a soft lint-free cloth
immediately to remove moisture.
USING THE AROMA DIFFUSER
Press repeatedly to toggle the mist level (low/
high) or off.
Press
repeatedly to toggle the desired lighting
mode (Breathing light/Candle light ickering/On
steadily) or off.
LOW WATER LEVEL INDICATION
When there is insufcient water, the unit stops diffusing
and ashes for 2 minutes before it turns off. Rell the
water tank and then turn on the mist again.
NOTE
Do not direct the aromatic mist towards
furniture or electrical appliances.
CARE AND MAINTENANCE
Always unplug the unit before cleaning.
To avoid electric shock and/or re hazard, do not
immerse the unit or the power dock in liquid or
allow detergent enter the unit.
Clean the unit regularly with a dry soft cloth to
prevent dust accumulation.
Do not let water, detergent or any other liquid enter
the fan opening.
Pour out remaining water before storing or transporting
the unit.
SPECIFICATIONS
L x W x H
109 x 109 x 136 mm
(4.29 x 4.29 x 6.42 in)
Weight 790 g
Temperature range
(operation)
10 °C to 40 °C
Temperature range
(storage)
-20 °C to 60°C
Power 12V 1A adapter
NOTE
The technical specifications for this
product and the contents of the user manual are
subject to change without notice.
2
3
EN