Oregon Scientific WR103 - How to Set the Alarms

EN
13
6. Press MODE to save the minutes selection and
advance to setting the day-of-the-week language.
Press
or to make the language selection in
English, French or Spanish.
7. When the weekday language has been selected,
press MODE to save and advance to setting the year.
Press or to select the year.
8. Press MODE to save the selected year and advance to
setting the month. Press or to select the month.
9. When the month has been selected, press MODE to
save and to advance to select the day of the month.
Press
or to select the day of the month.
When the day of the month has been selected,
press MODE to save and to advance to select the
display option of day-month (D/M) format or month-
day(M/D) format. Press
or to switch between
these 2 display options.
10. Press MODE or wait 9 seconds to exit the Clock-
Setting Mode and return to the time display.
HOW TO SET THE ALARMS
The WR103N has 2 alarms (alarm 1 and alarm 2). They
can be used together or independently. The Alarm icons
are only displayed when alarm 1 or alarm 2 are active.
No icon(s) indicate that the alarm(s) have not been set.
Remember: From the Clock-Display mode, press MODE
to enter Calendar-Display and then again to set Alarm 1.
Press MODE once more to set Alarm 2.
Setting the Alarm:
1. With the clock displayed, press MODE until alarm
(1 or 2) display is entered.
The last set time of the alarm will be displayed.
If you have not set the alarm before, or if the alarm has
been disabled, the time will be displayed as [----].
2. Press and hold MODE for 2 seconds.
Remember: At any stage of the setting sequence, if no
entry is made after 9 seconds, the unit will automatically
return to the Clock-Display mode.
3. To enter the hour, press
or until the desired
hour has been selected.
Remember: Pressing and holding
or will advance
digits in rapid sequence.
4. When the desired hour is reached, press MODE to
advance select minutes. Press
or to change
values.
NOTE