WR601/WR113 Radio Setup Instructions
SELECT NWS CHANNEL FREQUENCY
To receive alerts, you must also set the radio channel to match
the NWS channel
frequency.
1) Press the CHANNEL button for 2 seconds.
2) Press the UP and DOWN buttons to select the channel.
When scrolling through the different channels, you will hear
either static or the 24-hour weather broadcast. When the
channel selected is broadcasting the weather information for
your area, you have selected the correct channel.
3) Press MODE to confirm.
TIP Refer to Section D of this guide for information on how to find
your channel frequency.
To Next Page
Loading...
