Orgapack ORT 400 - User Manual

Details on the battery charger and battery specifications.

Information on compatible plastic strapping materials and dimensions.

Guidelines for safe disposal and environmental protection measures.

Critical safety measures, warnings, and proper usage guidelines.

Identification and description of the tool's main structural components.

Explanation of the control panel, buttons, indicators, and display.

How the tool performs tensioning, welding, and cutting operations.

Procedures and indicators for charging the tool's battery.

Step-by-step guide for performing strapping operations.

Method for inspecting the quality and integrity of the welded seal.

How to interpret the LED indicators for battery status.

Configuring the tool's operating modes (Semi-Auto, Full-Auto, Manual).

Adjusting the force applied to the strap during tensioning.

Configuring slow start-up for specific strap types to prevent dirt ingress.

Adjusting the duration of the friction welding process.

Instructions for adjusting the tool for different strap widths.

How to lock/unlock the control panel to prevent accidental setting changes.

How the tool enters and exits a low-power sleep mode to conserve battery.

Steps to perform a factory reset on the tool's settings.

Procedures for cleaning and replacing the tension wheel.

Procedures for cleaning and replacing the tooth plate.

Steps for safely removing and installing a new cutting knife.

Diagnosing and resolving common operational errors and malfunctions.