Oricom CARE80 - Page 7

5
Installation
Method B. Attach directly to a wall
1.Drilltwoholesvertically,oneabovetheother,83mmapart,andleave
the screws protruding from the wall by 5mm.
2. Follow steps 1 and 2 above.
3. Then press down and slide the bracket upward until the tabs snap into
place.
4. Plug one end of the telephone cable into the TEL. LINE jack at the
back of the base.
5. Plug the other end of the telephone cable into the telephone socket,
then align the base’s keyhole slots with the screws and slide the phone
downward to secure it.