Need help?Do you have a question about the Orien FS-260IM and is the answer not in the manual?
Explains the refrigeration cycle and component roles in ice production.
Details how water is supplied, distributed, and frozen onto the evaporator.
Visual representation of electrical components and explanation of operational modes.
Describes LED indicators, buttons, major functions, and important operational notes.
Provides a visual breakdown of all ice maker components with numerical references.
Covers essential safety warnings, preliminary maintenance checks, and basic diagnostics.
Addresses common causes and corrective actions when the ice maker fails to start.
Details problems and solutions related to water supply, flow, and leaks.
Covers troubleshooting for compressor startup failures and operation without ice production.
Diagnoses and resolves issues causing reduced ice output from the cooling or water systems.
Solutions for ice cubes being too small, too big, or having irregular formation.
Addresses various issues including electrical hazards, scale, noise, leaks, and harvesting difficulties.
Step-by-step instructions for replacing electronic control components like the control box and sensors.
Guide on modifying the ice cube size by adjusting a specific screw on the control box.
Detailed steps for replacing water pump and water dump valve.
Steps for replacing compressor, fan motor, hot gas valve, drier, and evaporator.
To Next Page
General