Oriental motor OPX-2A User Manual

Thank you for purchasing an Oriental Motor product.
This Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
HM-60273-2
Data Setter
OPX-2A
PKA
Series
OPERATING MANUAL
1 Safety precautions ................... 2
2 Introduction .............................. 3
3 Preparation ................................ 4
4 Installation and connection of
the
OPX-2A
............................... 8
5 Screen transitions ...................10
6 Monitor mode ......................... 16
7 Data mode ...............................21
8 Parameter mode ..................... 25
9 Test mode ................................. 32
10 Copy mode ............................... 37

Oriental motor OPX-2A Specifications

General

Input Voltage	100-240 VAC
Input Frequency	50/60 Hz
Output Current	2A
Protection Functions	Overcurrent, Overvoltage
Operating Temperature	0°C to 40°C
Humidity	85% or less (non-condensing)

Summary

Safety Precautions

Safety Warning and Caution Symbol Definitions

Explains the meaning of Warning, Caution, and Note symbols used in the manual.

Preparation

Basic Operations of the OPX-2A

Details the fundamental steps for navigating and operating the OPX-2A.

Edit Lock Function

Explains how to enable and disable the edit lock function.

Installation and Connection of the OPX-2A

Location for Installation

Specifies environmental and site conditions for installing the OPX-2A.

Installation Method

Provides dimensions for mounting and instructions for installation.

Connecting to the Motor

Details the procedure for connecting the OPX-2A to the motor.

Error Display on OPX-2A Screen

Lists error messages and their corresponding troubleshooting actions.

Monitor Mode

Monitor Items

Details how to monitor motor speed, position, operation number, and alarms.

Direct I/O Monitor

Explains how to check the ON/OFF status of motor input/output signals.

Data Mode

Setting Items

Parameter Mode

Setting Example

Parameter List

Lists all available parameters, their IDs, setting ranges, and effectiveness.

Test Mode

Direct I/O Test

JOG Operation

Teaching

Copy Mode

Error of the Copy Mode

Downloading to the Motor

Details the process of downloading data from OPX-2A to the motor.

Uploading to the OPX-2A

Explains how to upload data from the motor to the OPX-2A.

Verifying Data