Origin 21 ALLENDALE OUT-C7C-L2BL - Preparation; Assembly Instructions; Wiring Instructions

ASSEMBLY INSTRUCTIONS
5
1. Center and place the mounting bracket (A)
over the existing junction box opening.
Make sure mounting bracket (A) is oriented
as shown.
Hardware Used
AA
x 2
Fixation screw
Hardware Used
BB
x 3
Wire connector
WIRING INSTRUCTIONS
2. Clip LED wall sconce (B) to mounting bracket (A)
and then connect wiring as shown (white, black
and ground). Secure connections with a wire
connector (BB).
Place LED wall sconce (B) over mounting
bracket flanges.
2
A
2
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Turn off power at the circuit breaker and the light switch. Ensure the power is off before removing the
old light fixture.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly (not included): Screwdriver, Silicone-based sealant.
PREPARATION
1
A
1
B