Original Prusa MK3S User Manual

Prusa MK3S and MINI
3D Printers
 
    
     
  
  
   
      
      
    
  
   
Table of Contents
Introduction
                
                     
           

Original Prusa MK3S Specifications

General

Print Technology	Fused Deposition Modeling (FDM)
Build Volume	250 x 210 x 210 mm
Layer Height	0.05 - 0.35 mm
Filament Diameter	1.75 mm
Max Print Speed	200 mm/s
Max Nozzle Temperature	300 °C
Max Bed Temperature	120 °C
Weight	7 kg
Dimensions	550 x 400 x 500 mm
Nozzle Diameter	0.4 mm
Connectivity	USB, SD card
Frame Material	Aluminum
Supported Materials	PLA, ABS, PETG, ASA, Polycarbonate, Nylon, Flex