Function Setting
功能設定
6
7. 人體感應：按 鍵，‘Sensor’ 指示燈亮起，15秒後，風扇進入人體感應模式運作。
本機前方感應器會於機前約3米以內距離內感應是否有人體移動，若於一
分鐘內未能感應人體移動，本機會停止運作及進入待機狀態，原來亮著的
指示燈繼續亮起。當重新感應到有人體移動，本機會自動重新運作並會於
8小時後自動關機。若待機狀態持續12小時而未能感應任何人體移動，本
機會自動關機。
- 當左右搖擺時，感應器會於機前約3米以內距離及約90度內感應是否有
人體移動。
- 當上下搖擺時，感應器會於機前約3米以內距離及約35度內感應是否有
人體移動。
7. ECO SENSOR: Press the key, ‘Sensor’ indicator light will light on, about 15
seconds the Fan will enter the Eco Sensor mode. If no body movement
is detected for 1 minute, the Fan will stop working. The front sensor of
the machine will sense whether there is human movement within
about 3 meters in front of the machine, the Fan will work again
whenever it detects anybody movement and will automatically switch
off after 8 hours. If the Fan cannot detect any body movement after
12 hours,the Fan will switch off automatically.
- When using LEFT/RIGHT oscillate, the sensor will sense whether there
is a human body moving within about 3 meters in front of the
machine and within about 90 degrees.
- When using UP/RIGHT oscillate, the sensor will sense whether there
is a human body moving within about 3 meters in front of the
machine and within about 35 degrees.
左右方向
Left/Right
Direction
感應範圍
約3米以內
Sensing range
Within about
3 meters
約90度
About 90
degrees
約35度
About 35
degrees
上下方向
Up/Down
Direction
空置中
Vacant
空置中
Vacant
使用中
Using
停止運作
Stop working
若未能感應人體移動
於一分鐘內停止運作
Stop working within
1 minute if no body
movement
重新運作
Work again
立體搖擺對流掛牆扇
3D convection wall fan
To Next Page
Loading...
Need help?
General
