Orion 2000 - Page 44

User’ Guide
44
Example:
CM>show nat timer
Aging Timer (second)
ICMP protocol : 5 (secs)
UDP protocol : 1800 (secs)
TCP protocol : 3600 (secs)
GRE protocol : 3600 (secs)
Default Time OUT : 5 (secs)
¾ show user
Display all telnet user information
Example:
CM>show user
Index User Name From Alive(sec) Idle(sec)
1 admin 192.168.100.2 221 1
¾ show access-list
Display access list information
Example:
CM>show access-list
Access List
ID Control Address
41 Permit 00D0.5900.0000, hardware address mask FFFF.FF00.0000
42 Permit 0008.0E00.0000, hardware address mask FFFF.FF00.0000
1 Permit 192.168.100.0, wildcard bits 0.0.0.16
21 Permit 64.168.39.0, wildcard bits 0.0.0.8
¾ show snmp
Display SNMP parameters
Example:
CM>show snmp
SNMP read-only community: public
¾ show pppoe-forwarding
Display PPPoE enable or disable.
Example: