Orion 2000 - Rip

User’ Guide
54
IP
¾ ip route {enable/disable}
Enable/disable routing with RIP. Default routing mode is RIPv2.
Reference Mode of Operation section for example.
¾ ip natroute {enable/disable}
Enable/disable NAT and routing function simultaneously.
Reference Mode of Operation section for example.
¾ ip nat {enable/disable}
Enable/disable NAT/PAT function.
Reference Mode of Operation section for example.
RIP
¾ rip version {1/2/2b}
Version number : 1 for RIPv1, 2 for RIPv2, 2b for RIPv2-broadcast mode.
¾ rip timer update {10-65535 second}
Set interval between routing table update.
¾ rip timer response {10-65535 second}
Set interval between RIP response message send out.
¾ rip timer expire {10-65535 second}
Set routing entry expire timer.
¾ rip timer garbage {10-65535 second}
Set garbage collection timer.
¾ rip timer default
Set all of the RIP timers to default value.
¾ rip silence-mode {enable/disable}