Orion DVD/VR-2961 - Tape Removal Method at no Power Supply; Disc Removal Method at no Power Supply; Parental Control-Rating Level

TAPE REMOVAL METHOD AT NO POWER SUPPLY
1. Remove the Top Cabinet, Front Cabinet and DVD Block and the Fig. 1 below can be seen.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2.
Remove
one
screw
of
the
Loading
Motor
from
the
insert
hole
for
screw
driver
and
remove
the
Loading
Motor.
3. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
(Refer to Fig. 2)
4. Rotate the Clutch-Ass'y either of the directions to wind the Video Tape in the Cassette Case.
5. Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to
scratch on the tape.
Loading Motor
Capsian DD Unit
tos Clutch Assy
CP
Main Chassis (Front Side)
Fig. 2
DISC REMOVAL METHOD AT NO POWER SUPPLY
1.
Remove
the
Top
Cabinet
and
Front
Cabinet.
(Refer
to
item
1
of
the
DISASSEMBLY
INSTRUCTIONS.)
2.
Rotate
the
gear
of
Deck
CD
section
in
the
direction of
the
arrow by hand,
remove
the
disc
from
Deck
CD.
(Refer
to
Fig.
3)
PARENTAL CONTROL - RATING LEVEL
4-DIGIT SECURITY CODE CANCELLATION
lf the stored 4-digit security code in the Rating Level menu needs to be cancelled, please follow the steps below.
1.Turn Unit ON.
2.Press and hold the '2' key on the remote control unit.
3. Simultaneously press and hold the 'STOP' key on the front panel.
4.Hold both keys for more than 3 seconds.
5. The On Screen Display message ‘PASSWORD CLEAR' will appear.
6. The 4 digit password has now been cleared
Ai-2