Halo
Orion
Version 1
20.5mm
67mm Ø
Orion
The Halo range has been designed as the ideal solution to
retrotting projects, with the large rose perfectly covering
any existing 54mm holes in the door achieving a smart and
contemporary look on original doors.
Rose
9211D .....Dummy Lever
9212 ........ Passage Set
9217 ........ Passage Set - 70mm Backset
9215 ........ Privacy Set - Integrated
9218 ........ Privacy Set - Integrated - 70mm Backset
ą Dummy Set
Includes single Lever Handle and 1152 Dummy Mount
ą Passage Set
Includes Levers and 1357 Tubular Latch - 60mm backset
ą Passage Set - 70mm Backset
Includes Levers and 1101 Tubular Latch - 70mm backset
ą Privacy Set - Integrated
Includes Levers, 1358 Tubular Privacy Latch - 60mm backset
ą Privacy Set - Integrated - 70mm Backset
Includes Levers, 1359 Tubular Privacy Latch - 70mm backset
Specs
ą Large rose perfectly covers existing
54mm holes when retrofitting
ą Constructed from solid aluminium
ą Suits door thicknesses of 32–55mm
ą For door thicknesses that exceed this,
custom spindles and alternative fixings
will need to be sourced
ą Not for external use
Installation
ą 60mm backset (see diagram)
ą 70mm backset options available
ą 54mm drillout hole
ą Passage Set installation shown
67mm Ø
121mm
62mm
Dimensions
54mm Ø
Door Edge
60mm
11.5 mm
Diagram is not to scale, please refer to fitting instructions here.
To Next Page
General