Need help?Do you have a question about the Orion HCCA3000.1D-SPLX and is the answer not in the manual?
Instructions for connecting power and speakers to the amplifier.
Explains how to bridge amplifiers for higher power output.
Explains bridging for higher power output in 2-channel setups.
Explains 6-channel setup requirements for certain models.
Instructions for linking two amplifiers of the same model.
Explains LED indicators and common visual fault indications.
Instructions for connecting power and speakers to the amplifier.
Explains how to bridge amplifiers for higher power output.
Explains bridging for higher power output in 2-channel setups.
Explains 6-channel setup requirements for certain models.
Instructions for linking two amplifiers of the same model.
Explains LED indicators and common visual fault indications.
General| Power Output | 3000 Watts |
|---|---|
| RMS Power at 1 Ohm | 3000 Watts |
| RMS Power at 2 Ohms | 2000 Watts |
| RMS Power at 4 Ohms | 1000 Watts |
| Input Sensitivity | 200mV - 6V |
| Subsonic Filter | 10Hz - 50Hz |
| Low Pass Filter | 35Hz - 250Hz |
| Bass Boost Frequency | 45 Hz |
| Fuse Rating | 300A |
| Amplifier Class | D |
| Signal to Noise Ratio | 90dB |
| Bass Boost | 0 to +18 dB |
To Next Page
