Orion Network Pro RTX2 - 2 Installation and Setup; Rear Panel View

7
2. Installation and Setup
NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged. Please keep the original package in a safe place for future use. Avant l'installation,
veuillez inspecter l'unité. Assurez-vous que rien à l'intérieur de l'emballage n'est endommagé.
Veuillez conserver l'emballage d'origine dans un endroit sûr pour une utilisation future.
2-1. Rear Panel View
800/1.1K/1.5K IEC Type
2K IEC Type
2.5K/3K IEC Type
800/1.1K/1.5K NEMA Type
2K/2.2K NEMA Type
2.5K/3K NEMA Type
1. Programmable outlets: connect to non-critical loads.
2. Output receptacles: connect to mission-critical loads.
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. External battery connector