Why does my Orion TV-32082 LCD TV say no reception?
Make sure you have tuned in the TV stations. You can also try pressing '1' on the remote control. Ensure the antenna is connected properly and that the TV is ON and not in Standby mode.
Why does my Orion LCD TV switch off with missing antenna input signal?
This is normal behavior. The TV is designed to enter standby mode 15 minutes after the antenna signal disappears.
Why does my Orion TV-32082 have wrong colors?
Color and brightness errors can occur if the viewing angle or ambient air temperature exceeds the technical specifications.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Resolution | HD |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Display Resolution | 1366 x 768 pixels |
| Inputs | HDMI, USB, VGA, Component |
Describes controls on the front of the TV.
Describes controls on the right side of the TV.
Describes controls on the top of the TV.
Instructions for inserting batteries into the remote.
Guidelines for optimal remote control range and usage.
How to choose the active input source for connected devices.
How to select the preferred language for Teletext display.
How to change channels using number buttons or channel up/down.
How to adjust the TV's volume level.
Setting the TV to turn off automatically after a set period.
How the TV automatically detects and receives NICAM stereo broadcasts.
Specific information on stereo reception in Germany.
Selecting audio channels for NICAM broadcasts.
Selecting audio channels for broadcasts in Germany.
How to disable the TV's internal speakers.
Reducing picture noise for a clearer image.
Automatically displaying a blue screen and muting sound when no signal.
Automatically adjusts picture format based on signal.
Manually selecting picture aspect ratios like 4:3 or 16:9.
Zooms letterbox format pictures to fill more of the screen.
Setting the default display for 4:3 signals.
How to switch the TV to PC input mode.
Choosing the correct audio input for HDMI/DVI connections.
Explains the interactive teletext system with coloured buttons.
How to activate or deactivate the teletext display.
How to navigate and select teletext pages.
Holding a specific teletext page or subpage.
Selecting specific teletext subpages directly.
Enlarging parts of the teletext display.
How to make concealed channels visible again.
General guidance on connecting external devices.
Connecting a DVD player to the TV.
Connecting VCRs for playback and recording.
Connecting the TV sound to an external audio amplifier.
Connecting gaming consoles or cameras via AV input.
Connecting DVD players using Component Video for enhanced quality.
Configuring the AV2 Scart socket for input or output.
Technical details and specifications of the TV models.
To Next Page
