Dry Contacts Sensors
Maximum number of dry contact sensors 16
Maximum current 50 mA
Typical current 20 mA
Reference source voltage 3.3 Volts
Universal Data Interface: High Speed Synchronous “n x 64” Data Interface Type - User
Configurable DCE-DTE: (Part No. VCL-MX-1558-04-48)
Interface
V.35 (DTE/DCE)
V.36 (DTE/DCE)
X.21 (DTE/DCE)
V.11 (DTE/DCE)
RS422 (DTE/DCE)
RS530 (DTE/DCE)
Number of interfaces per card
4, (“N” x 64KBits/sec. per card)
Maximum number of interface cards 9
Bandwidth
(“N” x 64 Kbits/sec. interface
maximum value of “N” =30)-user selectable
Conformity Universal user-configurable as above
Mode Synchronous
Bit rate 64 Kbps to 1920 Kbps
User interface DCE/DTE (User programmable for DTE/DCE mode)
High Speed “n x 64” Data Interface Type: 10/100BaseT Ethernet with Electrical Ethernet:
(Part No. VCL-MX-1595-04-5.0)
Interface 10/100BaseT (Electrical)
Number of interfaces per card 4 Ports (4 x 10/100BaseT Electrical)
Maximum number of interface cards 9
Application Point to point
Bandwidth
(“N” x 64 Kbits/sec. interface
minimum value of “N” =1
maximum value of “N” =30) - user selectable
Aggregate bandwidth
1920Kbps – maximum, user programmable in steps of
64Kbps from 64 Kbps to 1920Kbps.
Conformity 10/100BaseT Ethernet Electrical
User interface 10/100BaseT
To Next Page
Loading...