Dimensions and Appearance
Height 266 mm (19” 6U high)
Width 482 mm
Depth 270 mm
Weight 12 Kgs.
Chassis Color Matte Black - Powder coated
Applications
The VCL-MX Version 6 - E1 160Mbps Multiplexer can be configured in Linear and Bus architectures.
It can be used in the core of the network to provide high-speed backbone network.
The VCL-MX Version 6 - E1 160Mbps Multiplexer could provide the core for cellular or mobile networks
between Mobile Switching Centers with subtended.
VCL-MX Version 6 - E1 160Mbps Multiplexer could also be used to provide versatile cross-connect
functionality to connect telephone exchanges in VCL-MX Version 6 - E1 Multiplexer in dense metro
areas.
Telco Networks Providing Voice and Data Services
VCL-MX Version 6 - E1 160Mbps Multiplexer is an ideal platform to provide high-end data and voice
requirement of clients. VCL-MX Version 6 - E1 160Mbps Multiplexer can be installed at the regional and
gateway Points of Presence (POP) locations in order to cater to the ever-growing data requirements of
the customers while supporting legacy services at the same time.
The advantage that the VCL-MX Version 6 - E1 160Mbps Multiplexer provides the Telecom Service
provider is as follows:
• The VCL-MX Version 6 - E1 160Mbps Multiplexer enables network simplifications by collapsing
networks, nodes and services into a single multi service device. A smaller number of higher-
density nodes and node types enable cost savings as a result of a smaller, more homogenous
network to manage.
• The flexible architecture of the VCL-MX Version 6 - E1 160Mbps Multiplexer series ensures that
the network is future proof, and the service provider has the flexibility of choosing a technology
he thinks useful at any time in the future with minimal investment.
To Next Page
Loading...