4 ohm
4 ohm
4 ohm
4 ohm
Parallel - Two Speaker (dual 4 ohm voice coils)
Two dual 4 ohm voice coil woofers with voice coils in parallel and the two woofers in
parallel results in a
1
ohm load to the amplifier.
- - - -
+
+
+
+
Figure 5
+
Figura 5
Abbildung 5
-
1. Connect the speaker in parallel by connecting the four positive (+) terminals
together and the four negative (-) terminals together.
2. Wire the positive (+) terminals of the woofers to the positive (+) terminal on
the amplifier. Wire the negative (-) terminals of the woofers to the negative (-)
terminal on the amplifier.
To Next Page
Loading...
