The Orion XTR Subwoofers are high-performance car audio devices designed to deliver powerful and clear bass in mobile audio environments. This manual provides comprehensive information on the installation, setup, and integration of these subwoofers into a vehicle, ensuring users can achieve optimal performance and years of high-quality listening enjoyment.
Function Description
The Orion XTR subwoofers are engineered to reproduce low-frequency sounds, commonly known as bass, with exceptional clarity and power. They are designed for integration into car audio systems, enhancing the overall sound experience by adding depth and impact to music. The subwoofers come in various models (XTR102D, XTR104D, XTR122D, XTR124D, XTR152D, XTR154D), each tailored to specific power handling and impedance requirements, allowing users to select the best fit for their amplifier and vehicle.
Usage Features
The XTR subwoofers boast a range of features designed for durability, performance, and ease of installation:
- Robust Construction: The subwoofers feature a polypropylene dust cap and paper cone, both moisture and UV resistant, ensuring longevity and consistent performance even in varying environmental conditions. A SANTOPRENE surround provides linear controlled long excursion, contributing to deep and accurate bass reproduction. The custom stamped steel frame offers structural integrity, while large ceramic magnets and a steel back plate/pole piece T yoke assembly contribute to powerful motor strength.
- Advanced Cooling System: A 1.125" vent is integrated as part of an enhanced voice coil cooling system, utilizing forced convection to dissipate heat. This feature is crucial for maintaining performance and extending the lifespan of the voice coil, especially during high-power operation.
- High-Temperature Voice Coils: The subwoofers are equipped with high-temperature copper dual 2 ohm or dual 4 ohm voice coils, designed to withstand intense thermal stress and deliver reliable power handling.
- Interlaced Conex Spider: An interlaced Conex spider with stitched and looped tinsel leads attached ensures precise cone control and durability, preventing damage during extreme excursions.
- Spring-Loaded Push Terminals: These terminals provide secure and convenient connections for speaker wires, simplifying the installation process.
- PVC Magnet Protector and Trim Ring: A PVC magnet protector safeguards the magnet assembly, while a PVC trim ring offers a clean, finished look once installed.
- Enclosure Versatility: The manual provides detailed recommendations for both sealed and vented enclosures, allowing users to choose the enclosure type that best suits their listening preferences and vehicle space. Sealed enclosures offer high power handling, great transient response, and smooth roll-off, while vented enclosures provide increased output, higher power handling, and extended frequency response around the tuning frequency.
- Wiring Configurations: Comprehensive wiring diagrams are included for various setups, including single speaker (dual 2 ohm and dual 4 ohm voice coils) in series and parallel, as well as multiple speaker configurations (two, three, and four speakers) in series/parallel. These diagrams guide users on how to achieve desired impedance loads (e.g., 1 ohm, 2 ohm, 4 ohm, 8 ohm) for optimal amplifier matching.
- Detailed Enclosure Recommendations: The manual offers specific enclosure dimensions and parameters for each XTR subwoofer model, including external and internal dimensions, wall thickness, and box parts (top, bottom, front, back, sides). For vented enclosures, port tuning frequency, port diameter, and port length are also provided, ensuring accurate construction for optimal performance.
Maintenance Features
While the manual primarily focuses on installation and performance, it also touches upon aspects related to maintenance and troubleshooting:
- Troubleshooting Guide: A dedicated troubleshooting section helps users diagnose and resolve common issues such as no sound, rattling noise, or distortion at high volumes. This guide covers checks for amplifier power, overload LEDs, impedance, speaker movement, mounting, enclosure construction, speaker polarity, and wiring connections. It also advises on verifying amplifier and crossover settings.
- Professional Installation Recommendation: For optimal performance and to ensure proper installation, Orion recommends having an Authorized Orion Dealer install the product. This helps prevent damage and ensures the system is set up correctly.
- Contact for Support: Users are encouraged to contact Orion's service department at support@orioncaraudio.com for any questions, issues, returns, or warranty claims, rather than the retailer. This ensures professional and timely assistance.
- Warranty Information: The product comes with a one-year warranty against defects in material and workmanship, provided it was purchased from an Authorized Orion Dealer. The warranty details outline conditions for service, including the requirement for dated proof of purchase and the voiding of warranty if service is performed by unauthorized personnel. It also specifies that the warranty does not cover misuse, neglect, accident, or improper installation.
- Safety Warnings: The manual includes critical safety warnings, advising users to thoroughly investigate their vehicle's layout before drilling or cutting to avoid damaging gas lines, hydraulic lines, or electrical wiring. It emphasizes securing the system properly, protecting wire connections, and disconnecting the battery's ground cable before making electrical connections. Users are also warned against installing the product where it may be subjected to excessive heat, moisture, or physical impact, and to use only fuses identical to the recommended amperage.
In summary, the Orion XTR Subwoofers are designed for car audio enthusiasts seeking powerful and reliable bass. With robust construction, advanced cooling, versatile enclosure options, and detailed guidance for installation and troubleshooting, these subwoofers offer a comprehensive solution for enhancing in-car sound systems. The emphasis on professional installation and dedicated customer support further ensures a positive user experience and long-term satisfaction.
Need help?
General
To Next Page
