- 6 -
3. Temperature measurement:
In the object mode: Press and hold the “Measuring switch “to
measure temperature at a rate of 2 times per second. The SCAN
icon is displayed on the LCD. The HOLD icon disappears. After
releasing the Measuring switch, the temperature measurement
is stopped. There will be “BIBI” sound at the same time.
This icon shows the status.
4. Backlight control
Press the backlight control key to turn on / off the backlight.
When the backlight is on, is displayed on the LCD and
disappears when the backlight is off.
5. Mode switching
Press "Body / Object Mode Switching Key" to switch between
body and object modes. The default is human body mode. The
icon is displayed on the LCD when switching to the surface
temperature, and disappears when turned off. Can be
switched in the test state.
When in the body mode (default at startup), press and hold the
“Measuring switch “to take a temperature measurement at a
rate of 2 times per second. The SCAN icon is displayed on the
LCD. The HOLD icon disappears. After releasing the “Measuring
switch “, the temperature measurement is stopped. The icon
appears and at the same time there will be “BIBI” sound twice.
This icon is off.
To Next Page
Loading...