11
-
Orkel Compacon guarantee this machine against failure in producon and material error for a period of 12
months or 50.000 bales produced, from date of delivery.
-
1. Warranty is limited to the actual value of the machine. According to performed maintenance, range of use
and condion.
2. Warranty is limited to the value of damaged components only.
3. Warranty is limited to elapsed me to repair. Assessed and determined by Orkel Compacon AS.
4. Warranty repairs must be agreed with Orkel Compacon AS before repair takes place.
5. A completed warranty form must be submied to Orkel Compacon within 14 days of delivery.
Orkel Compacon Ltd is under no circumstance responsible for consequenal damages to 3 party arising out
of any maers, relang to the machine.
-
Normal wear and tear on parts such as; Rubber belts, tyres, hydraulic hoses, knives, chains and bearings is
not included in the warranty.
On the PTO sha there is a warranty form delivered by the manufacturer. Please see manufacturers own
warranty coverage in aachment on the axle.
Use of non-original parts, improper use and insucient maintenance, will lead to the disappearance or re-
ducon of the previously menoned warranty. The warranty may be withdrawn if the instrucons given in
this manual are not followed.
-
If anything happens to your machine during the warranty - period. Stop the machine immediately to avoid
further damage.
Contact your local dealer or Orkel Compacon AS. Please see contact informaon in secon 9.
Delivery and warranty form must be sent / handed over to Orkel Compacon AS within 14 days aer rst
start-up. The form must be completed in three copies. One for customer, one for local dealer and one for
Orkel Compacon AS. This form is located in a envelope, enclosed delivery of the machine.
-
-
All repair and service work must be carried out by skilled mechanics. If not, (Owners risk) there might be
some limitaons in the warranty given by Orkel Compacon Ltd.
To Next Page
Loading...