23
-
1. Do not start operang the machine, unl you have read and understood the operang instrucons
and safety precauons.
2.
Always stop the tractor engine before; lubricang, adjusng, maintaining or repairing the machine.
Also remove the ignion key to prevent accidentally start .
3. Ensure that there are no people between tractor and machine when connecng and disconnecng. It
can quickly result in crushing injuries.
4.
Never allow children to stay near the machine during operaon. Especially young children can do un-
predictable things.
5.
Danger. Keep clear of moving parts in chamber.
6.
People near the machine must be aware and keep their distance when the bale is released from the
pressure chamber or unloaded from the wrapper table.
7. Always use the hydraulic safety valves on the tailgate liing cylinders, to secure the tailgate in open
posion.
8. The net or widelm is cut with a sharp knife. Be careful during loading a new roll or if any adjustment
is done to the knife system.
9.
All parking of the machine must be on level ground and secured with wheel chocks.
10.
Between the tractor and the machine is a rotang PTO - sha . No person is to stand between tractor
and machine while the engine is running. Do not wear loose clothing, scarfs, etc.
11.
Safety distance, a minimum of 5 meters. No persons allowed closer than 5 m when the machine is
operang.
12.
Danger. Film holder/cuer has a sharp knife and there is a risk of cung/crushing injury. Always keep
closed when the machine is not operang
13. Safe distance. Do not enter below hopper.
14. Noise zone. Use ear protecon.
15. Danger zone. Access only for operator or mechanic.
16. Make sure the transmission is running with the correct speed and direcon. Wrong speed and/or di-
recon can damage machinery and may cause great danger to persons nearby. The machine is de-
signed for 850 rpm.
17. Strapping point.
18. Liing point.
19. Jacking point.
20. Hydraulics safety device, tailgate liing cylinders.
To Next Page
Loading...