ORKEL MP 2000 - 4.9 HYDRAULIC SETTINGS; 4.9.1 HYDRAULIC VALVES, OPERATION AND OVERVIEW

49
 




Basic sengs of the machine is been made during test run at the factory. Before making any changes and
surveys on the machine, the hydraulic oil must have reached its normal operang temperature.

See Chapter 6 specicaons, which types of oil that are recommended.
In descripon of how to adjust the valves in chapter 4.9.2, the valves is refer to as numbers. See the over-
view in chapter 4.9.1.



Valve:54
Valve:53
Valve:52
Valve:50
Valve:51