ORKEL MP 2000 - CHAPTER 5 - REPAIR AND MAINTENANCE; 5.1 Operator Maintenance, Control and adjustments; 5.2 Lubrication

5
-
 
5.1.1 Electric system
5.1.2 Wheels
5.1.3 Chains
5.1.4 Wrapper
5.1.5 Chamber
5.1.5.1 Chamber-belt front, adjustment
5.1.5.2 Chamber-belt rear, adjustment
5.1.5.3 Chamber-belt, tension
5.1.5.4 Installing, replacing a new chamber-belt
5.1.5.5 Slide bearing, rollers
5.1.6 Hydraulic system
5.1.7 Hopper - Elevator - Belt under
5.1.8 Belt, wrapper table
5.1.9 Frame - Main bolts
5.1.10 Wide lm - Net tying
 
5.2.1 Lubricaon system
5.2.2 Rell
5.2.3 Troubleshoong
5.2.4 Lubricaon scheme
5.2.5 Approved/Recommended types of Grease and Oil
 
5.3.1 High-pressure washer
5.3.2 Storage
 -
5.4.1 Fuses
5.4.2 Wiring diagram
5.4.3 Sensors, overview
 
 
5.6.1 Precauons before welding
 
5.7.1 Scheme - Service and maintenance